Timing side apart with transmission removed. Forgot to check end float before pulling. Damn it!!
Transmission out on the bench
Disassembled. The gear dogs are pretty worn and the cam plate was just a bit worn but really just didn't seem like a good cut. Really harsh lines and sharp edges in the tracks. Luckily I have a spare '70 trans that I'll swap a few parts with. The '70 has a thicker cam plate so I'll also need to use the cover from it as well.
Clutch side apart, since you need the clutch out before the trans can be pulled.
Time to reassemble, check end float and possibly take it right back out ;-0
Here this whole time, I thought it jumped out of gear because it is British.
ReplyDeleteActually these transmissions are rock solid....except when whatever kook had his hands in it before me decided to use the wrong spacers and create a shit ton of end float which will result in fairly quick wear of the gear dogs and cam plate.
ReplyDelete